Hospital chair will usually choose those styles?

by:OUHE     2020-05-27
The selection, southern medical university hospital chair, integral curve according to the human body engineering design. Made from high quality stainless steel precision casting, supplement of high-quality hemp cloth facing, use for a long time is not easy to deformation. Base on the proportion of part and backrest is moderate, appearance to the point, inside collect amplifier, color chooses proper, not dull. Curve modelling, material is qualitative soft hard moderate, full of modern flavor. The hospital chair standard configuration: 1: the back: 1: high quality cold cut steel plate. 2: on both sides of the seat back support to use high quality cold cut steel plate, using a large hydraulic cold press molding machine with special die, and then use a special welding mold positioning, and then to combination welding. 3: 座背 stent was added at the bottom of the weld 1 & other; V-shaped iron & throughout; ( For Cuo back with triangle rail installation) The specified point, using a dedicated fixture positioning, with fine polishing treatment after welding. 2: rail: 1: is made of high qualified steel plate, using large ruffled machine positioning flanging, after multiple process molding on the bottom rung position using a dedicated fixture and welding reinforcing plate, through a special die in the specified position in the rail mounting holes, grinding and polishing processing for surface coating treatment. 2: plastic plug seal on both ends of the circular tube, beautiful and easy, convenient installation, the standard color is black. 3: the armrest: 1: the seamless steel pipe, cold through special large pipe bender for special mold cold bending forming, positioning welding, grinding and polishing processing for surface coating treatment. Four: the chair foot: 1: high quality cold cut steel plate, pressure mold cold pressing molding, through special large fine positioning welding, grinding and polishing processing for surface coating treatment. 2: adjust the floor mat adopt new PP and specific screw injection molding, contact with the ground at the bottom of the foot to prevent slippery design, the standard color is black. 3: chair foot cover is made of high quality stainless steel cold pressing through special die forming, specimens for stainless steel color. Five: leather cushion: high quality and comfortable imported leather finish, with sponge, soft hard moderate, long-term use is not easy to deformation.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...